A no-mix, no-mess alternative to traditional thin-set mortars spreads quickly and easily. Recommended to bond porcelain, stone, marble, granite and ceramic or porcelain tile up to 8" x 8" (20 x 20 cm). Can be used with tile with one side up to 15" (38 cm), but dry time significantly increases. For interior wall and floor installations. Use white SimpleSet when installing lighter-color stone and tile. Key Features Ready to use No mixing, no mess Just spread and set Suitable Tile Types Porcelain Marble, granite, stone (white mortar) Ceramic, mosaic Quarry tile Suitable Substrates For interior dry areas Suitable for some wet areas such as tub surrounds and shower walls. Concrete, masonry Plaster, gypsum wallboard (dry areas) Bonds porcelain, stone, marble, granite and ceramic tile up to 18 in x 18 in. For interior wall and floor installations. Exceeds ANSI A136.1 Type I. Covers 20 to 50 sq-ft depending upon the size of trowel and tile Applicable Materials: Ceramic Granite Gypsum Wallboard Marble Masonry Mosaic Plywood Porcelain Stone Color: White Compositions: Crystalline Silica Quartz Calcium Carbonate Ethylene Glycol Stoddard Solvent Sodium Hydroxide Coverage Area:40 to 44 sq-ft Drying Time:30 min Flash Point:212 deg F Frame Material:Vinyl Glass/ Screen Material:Glass Features This no-mix, no-mess alternative to traditional thin-set mortars spreads quickly and easily Can be used with tile with one side up to 15 in, but dry time significantly increases Bonds porcelain, stone, marble, granite and ceramic or porcelain tile up to 8 in x 8 in Ready to use Just spread and set

THIN SET MORTOR ADMIX 2.5GAL

Bonds ceramic tile up to 18 in x 18 in. For interior wall and floor installations. Exceeds ANSI A136 Type I. Covers 20 to 50 sq-ft depending upon the size of trowel and tile.

CUSTOMLITE GLASS TILE THIN-SET

THINSET FLOOR/WALL WHT REG (GRN)

THINSET FLR/WALL WHT POLIMER BLU

252 Silver is an economical polymer modified, bagged, cementitious thin-set powder to be mixed only with water using the thin-set method of installation. Uses • Designed for interior and exterior floor and wall installations of all types of ceramic tile, porcelain tile and stone over concrete, exterior glue plywood and a variety of other substrates. Advantages • Interior and exterior. • Exceeds ANSI A118.4 shear bond strength requirements. • Bonds to most surfaces. Suitable Substrates • Concrete • Exterior Glue Plywood (Interior Only) • Concrete Masonry • Brick Masonry • Non-Water Soluble Cut-Back Adhesive • Vinyl Or Other Resilient Tile • Gypsum Wallboard

252 Silver is an economical polymer modified, bagged, cementitious thin-set powder to be mixed only with water using the thin-set method of installation. Uses • Designed for interior and exterior floor and wall installations of all types of ceramic tile, porcelain tile and stone over concrete, exterior glue plywood and a variety of other substrates. Advantages • Interior and exterior. • Exceeds ANSI A118.4 shear bond strength requirements. • Bonds to most surfaces. Suitable Substrates • Concrete • Exterior Glue Plywood (Interior Only) • Concrete Masonry • Brick Masonry • Non-Water Soluble Cut-Back Adhesive • Vinyl Or Other Resilient Tile • Gypsum Wallboard

254 THINSET 50LB PLATINUM GREY